MODEL 3050 C-SQUEEZER

The Model 3050 is the Absolute Smallest and Lightest Rivet Squeezer in the world. It weighs a mere 1.05 Lbm without a yoke, or 2.48 Lbm with a 3" reach yoke.  This is a full 3 Lb lighter than a traditional air only unit.  The 3050 produces 2,690 Lbf of force, enough force to easily squeeze 1/8" AN470AD Aluminum rivets, typically found in light general aviation aircraft.

3050-2-NMY-C15-with-scale
















The 3050 C-Squeezer is ideally mated to the 3350 Pressure intensifier, which provides optimal control.  The feathering control of the squeezer system is far superior to pneumatic only squeezers, due to the movement of hydraulic fluid.

The 3050-1 includes a single axis hydraulic swivel (NOT an air swivel), and the 3050-2 adds a double axis swivel for more handling compliance.  If you want to fully understand the operation of the unit, read the operation manual listed below.  In short, the squeezer is hydraulically powered from the 3350 (or other hydraulic source).  The 3050 accepts industry standard CP-214 yokes, so yes, you can use the yokes you have already.

For pricing and availability, send an email to: 
 
numatx@att.net


3050-3350_SYSTEM

DOWNLOAD THE OPERATION MANUAL BELOW

NUMATX_MODEL_3050_OPERATION_MANUAL_REV-.pdf

 

NUMATX, INC.   DAYTON, OHIO, USA

numatx@att.net

937-435-8178

  Site Map